Radial Engineering IceCube, Balanced Line Isolator and Hum Eliminator
$31.99
The Radial Engineering IceCube is a balanced line-level isolator designed to quickly eliminate hum and buzz from an audio system by simply inserting it into the signal path.
Eliminate ground loops quickly
The IceCube is an ideal problem solver for today’s AV technicians and audio engineers, providing an easy way to insert…
The Radial Engineering IceCube is a balanced line-level isolator designed to quickly eliminate hum and buzz from an audio system by simply inserting it into the signal path.
Eliminate ground loops quickly
The IceCube is an ideal problem solver for today’s AV technicians and audio engineers, providing an easy way to insert an isolation transformer into the signal path to remove hum and buzz from ground loops, with a ground lift switch for additional noise reduction. Simply connect it between any two line-level devices, such as a mixer and a powered speaker, or a crossover and a power amp. The IceCube will eliminate ground loop noise without limiting the audio bandwidth or introducing phase shift, and it can handle hot signal levels without distortion.
Isolating the DJ mixer from a console
Plug a couple of IceCubes in between the DJ mixer and the main PA to rid the system from hum or buzz caused by ground loops. Standard XLR connections make it easy.
Isolating a crossover from a power amp
Eliminating noise problems can take hours of troubleshooting. The IceCube takes the hassle out of the equation with a plug and play solution that works every time.
Isolating a console from a remote tower
When distant power systems power equipment it often leads to noise, due to voltage fluctuations and ground contamination. The IceCube isolates the system to reduce noise.
Product Specifications:
Audio circuit type: Passive, transformer based
Transformer: Custom made Eclipse
Number of channels: 1
Frequency response: 20Hz ~ 20KHz (± 1dB)
Gain: 0dB / -5.7dB 10K / 600 Ω Load
Clip Level: 25dBu
Total harmonic distortion: <0.0006% 1KHz @ -10dBu
Intermodulation Distortion: 0.002% @ -10dBu
Input Impedance: 8.66k with 10k load
Output Impedance: 600 Ω nominal
Equivalent Input Noise: 110dBu
Maximum Input: 15dBu
Input Connectors: XLR Female
Output Connectors: XLR Male
Construction: 16-gauge steel
Size (L x W x D): 4.2″ x 1.32″ x 1.6″ (107mm x 34mm x 41mm)
Weight: 0.40lbs (0.18kg)
Shipping size (L x W x D): 8″ x 5″ x 3″ (203mm x 127mm x 76mm)
Shipping Weight: 0.55lbs (0.25kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Reviews
There are no reviews yet.